Home >

PRO2-5 First Alert RV Fire Extinguisher - 1-A:10-B:C
BRK Electron First Alert RV Fire Extinguisher - 1-A:10-B:C
 
Alternative Views:
: $24.43
Part Number: PRO2-5
Manufacturer: BRK Electron
UPC #: 29054000903

Quantity in Stock :

Availability: Out of Stock
No Longer Available

 
  • Rechargeable 2.5 lbs dry chemical fire extinguisher.
  • Easy to read pressure gauge.
  • Metal pull pin with a safety seal.
  • For use with class ABC fires, trash, wood, paper, liquids and energized electrical.
  • Easy to follow instructions on product label.
  • Includes bracket and strap for a secure mount.
  • Important note: This product cannot be shipped by air!
  • Limited 10 year warranty.

Fire Extinguisher - 1-A:10-B:C By First Alert

Fire extinguishers can fight back against most RV fires including wood, paper, trash, flammable liquids and electrical. This is a rechargeable extinguisher, so if used it can be refilled by a professional. It has a durable metal head which is designed to meet demanding needs and has a corrosion resistant and color coated, easy to read gauge which provides accurate measurements. It also has a metal pull pin that has a safety seal to prevent accidental discharge. This comes with a secure mounting bracket , so it can easily be mounted to the wall, snap in the extinguisher and use the strap to secure it in. There is a label on the front with easy to follow instructions, which is chemical resistant and waterproof, so the label won't get destroyed overtime. This extinguisher comes with a 10 year limited warranty.

How To Properly Use A Fire Extinguisher

By remembering the word PASS you will be able to use any RV fire extinguisher. Pull the pin, Aim extinguisher at the base of the fire, Squeeze the trigger and Sweep from left to right until the fire is out. Always make sure to keep a safe distance, about 6 feet away from the fire and always use the proper fire extinguisher for the class type of fire, otherwise it may not work.

UL Rating

Fire extinguishing capacity is rated in accordance with ANSI/UL 711: Rating and Fire Testing of Fire Extinguishers. They are described using the numbers that come before the class letter, such as 1-A:10-B:C. The 1 before the A multiplied by 1.25 gives the equivalent extinguishing capability in gallons of water. The 10 before the B tells you the size of fire in square feet that the user should be able to extinguish. There is no number before class C because it is just there to let you know that it will not conduct electricity.

Technical Specs.

Dimensions: 3.1” Diameter x 14.2”Height
Weight: 5.1 lbs.
Temperature Range: -40°F (-40°C) to 120°F (49°C)
Pressurized to: 100 psi (689kPa)
Head/Can Type: Metal/Steel
Rechargeable: Yes, per First Alert M08-0145 Service Manual
Rating/MSDS: 1-A: 10-B:C / F-9751 Foray® monoammonium phosphate
Listing: Listed to UL711, ULC-S508, UL299 and ULC-S504 Standards
The fire extinguisher shall be a First Alert Model FE1A10GR and shall provide at a minimum the following features and functions:
  • Dry powder fire extinguisher containing monoammonium phosphate fire extinguishing agent.
  • Rated at 1-A: 10-B:C.
  • A commercial grade metal head that is rechargeable per First Alert M08-0145 Service Manual and a red steel can.
  • An easy to read pressure gauge with a needle that visually shows fire extinguisher pressure status via a green section signifying pressure is good and a red section signifying unit needs to be recharged or replaced.
  • A plastic mounting bracket with strap.
  • U.S. Coast Guard approved for marine use with approved bracket. Marine Type, U.S. Coast Guard Type-A-Size II, Type-B:C-Size I. Approval 162.028/EX3622. Valid only with bracket assembly number P87-0340 or bracket number B70-0161 and strap number S70-0007.
  • The unit shall be capable of operating between -40°F (-40°C) and 120°F (49°C).
  • Pressurized to 100 psi (689 kPa). Meets DOT requirements for cylinders. Tested to 300 psi (2070 kPa).
  • The unit shall at a minimum be listed to and meet the requirements of UL711, ULC-S508, UL299 and ULC-S504.