 |
 |
 |
 |
Use Permatex Sensor-Safe Silicone Gasket Maker to seal your busted water pump for leading results and satisfaction. This outstanding substance is ideally used to seal valve covers, oil pans, thermostat housings, and more!
- Produces formed-in-place gaskets that won't crack, shrink, or migrate
- Low odor substance eliminates possible headaches, burning eyes and nose
- Low odor formula will not foul oxygen sensors
- Successfully replaces most any cut gasket delivering reliability and dependability
- Ability to coat pre-cut gaskets increasing authenticity without contaminating oxygen senors
- Temperature range: -65 degrees Fahrenheit - 500 degrees Fahrenheit (-54 degrees Celsius to 260 degree Celsius) intermittent.
- Substance resists auto and shop fluids, ensuring a strong formula
- Ideally used to seal valve covers, oil pans, timing covers, water pumps and thermostat housings
- Color: Blue paste
- Weight: 0.25 Lbs
- OEM certified
- Limited 90-Day warranty
Note: Store this product in a dry and well-ventilated area to protect from moisture.
Permatex Sensor-Safe Silicone Gasket Maker - 3 Oz.
DIRECTIONS:
For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex® Brake and Parts Cleaner.
Cut nozzle to desired bead size gaskets are best formed using a 1/16" to 1/4" (2 to 6 mm) bead.
Apply a continuous and even bead of silicone to one surface; surround all bolt holes. Assemble parts immediately. Finger tighten bolts until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn.
Silicone dries in 1 hour, and fully cures in 24 hours. Allow more time in cold or very dry conditions.
Replace cap after use. Clean hands with dry cloth or Permatex® Fast Orange® Hand Cleaner. Clean tools with non-flammable cleaning fluid.
NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.
|
|
 |
 |
 |
 |


|