Home > Appliances > Air Conditioners >

TurboKOOL RV Evaporative Air Swamp Cooler
TurboKOOL 2B-0001 RV Evaporative Air Swamp Cooler
TurboKOOL RV Evaporative Air Swamp Cooler


 
Alternative Views:


Price: $649.00
MFG P/N: 2B-0001
MFG: TurboKOOL
SHIPS: 5-7 Business Days


Quantity in Stock :1


Availability: In Stock
Product Code: 2B-0001
Qty:

Description
 
The TurboKOOL 2B-0001 RV Evaporative Air Swamp Cooler is the first successful, trouble-free and economical solar or 12-volt evaporative cooling system of its type for RVs. Delivers cool air without the expense, noise and fumes of an A/C and generator combination.
  • 3-speed, exceptionally quiet, air cooled reversible motor cools down the inside of your RV.
  • Also can be used as an exhaust fan.
  • Hot, dirty air becomes clean, cool air as the spin-spray action washes out dust, pollen and impurities.
  • Advanced spin-cooling technology.
  • "Spin-Spray" pump cannot wear out or burn out.
  • Economical operation.
  • Easy to clean.
  • Built-in reservoir.
  • Dry air used to cool motor for longer motor life.
  • No bearings or motors exposed to wet air.
  • Spraying water over entire surface of filter ensures peak cooling and filtering.
    • Much more efficient than dripping water over a filter.
  • Non-organic industrial foam filter element - no bacterial growth or foul odors.
  • Can be adapted to nearly any remote, stand-alone cooling requirement.
  • Automatic water level control valve.
  • Streamlined styling - low profile "no-snag" contour reduces wind resistance.
  • Recommended for areas where the average relative humidity does not exceed 75%.
  • Quiet and efficient operation.
  • All rust-resistant construction.
  • Individually adjustable louvres for air distribution the way you direct it.
  • Body and hood are UV protected to prevent cracking, discoloration and fading.
  • Pump can not be damaged if run without water.
  • Operates with a solar panel and/or on a standard 12-volt system.
  • Amp draw:
    • High: 4.6 amps
    • Med: 3.2 amps
    • Low: 2.2 amps.
  • Cools 750 CFM, or an RV approx. 20' - 25'.
  • Temperature reduction usually between 20-30 degrees.
  • Consumes approx. 3 gallons of water a day.
  • Fits all standard 14" x 14" roof vent openings.
  • Dimensions: 35" x 22" x 11.5".
  • Weight: 24.66 lbs.
  • Easy installation with simple hand tools.
  • Instruction Manual
  • Does not include vent frame, water filter, mounting gusset, accumulator tank, 3 gallon water tank or 15 gallon water tank
  • Limited 1-Year Manufacturer Warranty.
  • Made in the USA.

TurboKOOL RV Evaporative Air Swamp Cooler

Additional Product Information
How does the Spin Spray Technology work:

The cooling is caused by evaporation. The warm dry outside air, with its low relative humidity, is pulled into the unit by the fan, while water is being sprayed, by our unique spin spray pump, on a cylindrical porous filter. As the dry air is forced through the wet filter by the fan, the water is evaporated, which cools the air coming out of the cooler. This cool air must be allowed to flow freely through the RV or facility being cooled and out through a window, door or vent. If the air is restricted the cooling will be less. The size of the RV or facility being cooled, how well it is insulated, exterior temperature and humidity are just some of the variable factors that can affect the cooling efficiency.

Troubleshooting:

UNIT DOES NOT OPERATE:
1. Try switches at all speeds in both directions.
2. Check wire connections at switches, resistors, at wire nuts and at power supply.
3. Check fuse and charge level of battery.
4. If installed on trailer and operated on vehicle battery, check if inner connection correct.
5. With speed switch in OFF position, remove hood. Rotate fan by hand to check for interference with venturi opening, filter, pump rubbing on bottom of baffle or motor frozen.
6. Check for mineral/salt deposits in and around mechanical parts such as fan blade, spin-spray pump and water cup.

INADEQUATE COOLING:
1. If no air flow, check above items 1 thru 5.
2. Check water level, water supply lines and valve.
3. Check filter and pump. If dirty, clean as directed under maintenance.
4. Check to see pump cone tip is submerged in water and check 1/2 - 3/4" clearance between end of pump cone and bottom of circular water pan.
5. If water depth is less than 3/4" - 1" depress float and observe if water is flowing thru the valve. Refer to Item 5, "Adjustment Procedures" on Page 9 to reset.
6. Check filter for mineral/salt deposits that can cause the filter to perform very poorly.

EXCESS VIBRATION:
1. Check fan blades and pump cone, rotating by hand. Note whether fan blades are broken or if cone set screw is loose. Are fan blades hitting filter or edge of venturi opening?
2. Check for loose screws, loose or deteriorated rubber motor mounting bushings. Replace if needed.
3. Excessive mineral/salt deposits can cause imbalance in the fan blades and the spin-spray pump - in turn, creating a vibration.

WATER LEAKAGE:
1. Check to make sure your unit is mounted on a portion of the roof level with the ground.
2. Check water level in unit. In Installation Manual refer to Item 5, "Adjustment Procedures," on Page 9 for float valve adjustment.
3. Also see "Notes to Keep in Mind" on Pg. 6

EXCESS WATER CONSUMPTION:
1. Check items listed under Water Leakage above.
2. If rate of water consumption is not due to a leak but instead only during operation, remember, your TurboKOOL is providing cooling effect in proportion to the water consumed. Under conditions of high temperatures and low humidity, more water is used.
3. Severe driving conditions, such as rough roads or sharp turns cause excessive action of the float valve and allows the unit to overfill. See item 12 in Installation Instructions.

Recommended Routine Maintenance
1. Every 6 months or as needed, remove the filter and clean by hosing down with water from outer surface inward, or soak in a bucket of soap & water or apple cider vinegar to loosen dirt, alkaline etc. If your TurboKOOL is used in certain areas where the water has high alkali content, it may be desirable to clean more often. In these areas it may be to your advantage to have an extra filter on hand.
2. Check the spin-spray pump cone for caking of alkali and clean off with fine steel wool. Make sure the holes at top of cone are not clogged. Since the inside of the cone pump can also become caked with alkali, you may wish to replace it periodically if performance drops.
3. The motor is equipped with factory oiled and sealed bearings. Under normal use, the bearings need no additional oil. If used in high alkali areas for long periods of time, a drop of oil in the lower bearing (3-in-1 or sewing machine oil) will help. We recommend that you turn on your TurboKOOL, either wet or dry, at least once a month and run for 5 minutes or more, even during the off season.
4. Before the start of the warm season, check the condition of the filter, motor mount grommets and wiring. Replace if they are cracked, brittle or deteriorating.
5. To clean the circular water pan, remove the hood and 4 screws, and the 3 screws holding the motor mount assembly. Remove (as an assembly) - the motor, 10" fan and the spin-spray pump. Gently turn over and lay to one side. Remove the filter. Remove the two thumb screws holding the baffle ring onto the water tray. You may now wipe out the circular water tray.