![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Left_MidDiv.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Right_MidDiv.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
Additional Product Information
Display Mounting Panel: Black flush mount panel, approximately 4” wide by 2.8” high by 1” deep (102mm wide X 71mm high X 25mm deep). Panel screws to wall. Required cutout size is 3” wide by 1.8” high.
System Power Requirements: Display requires 12 volts from the RV battery, the system will function from 11 volts to 16 volts. Current drain is less than 200mA.
Wiring: A single two wire conductor required from the display to the senders. All the senders are wired in parallel. 12 V power and ground required for display. Single wire required for LPG sender if sender grounded at tank.
|
|
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif)
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif)
|