Home > Electronics > Seelevel Tank Monitoring System >

Garnet 709-4 SeeLevel (4) RV Tank Monitoring System

Garnet 709-4 SeeLevel II Tank Monitoring System

Garnet SeeLevel II Tank Monitoring System

Alternative Views:

Price: $290.95

MFG P/N: 709-4_System
MFG: Garnet Instruments
SHIPS: Same Business Day Before 1 PM EST

Quantity in Stock :18

Availability: In Stock

Qty:

Description

Instructions

The SeeLevel 709-4 Tank Monitoring System is designed to accurately display fluid levels in a motorhome or camper with four holding tanks. This system monitors battery voltage, fresh, grey, galley and black water levels. The level in percent is shown on a three digit LED display.

Monitors battery voltage, fresh water tank, grey water tank, black water tank and galley tank
Provides accurate tank level information using percentage of full readout
Tanks are monitored using Garnet’s proprietary external level sensing technology
- This ends fouling problems caused by debris build-up in the holding tank
- Detailed diagnostic information monitors sender operation
Tank senders connect to the display via a common bus network
- All senders can be connected using the same wire
Measures tanks from 3.5" to 34" depending on the sensors you specify.
- 710-AR Sender (standard) 3.5" min to 10.5" max (stacked = 21")
- 710-ES2 Sender (optional) 5.5" min to 14" max (stacked = 25")
- 710-SS Sender (optional) 7" min to 14" max (stacked = 34")
Uses common industry connector for ease of installation and servicing
Display requires 12 volts from the RV battery, the system will function from 11 volts to 16 volts
Current drain is less than 200mA
Panel Dimensions: 4" W x 2.8" H x 1" D
- Required Cutout Size: 3" W x 1.8" H
Includes:
- (1) Display monitor.
- (1) pigtail
- (4) mounting screws.
- (4) 9″ 710-AR standard tank senders
NOTE: If you have taller tank(s) and require a 12" Sender = 710-ES or 16" Sender 710-SS specify in the checkout order notes along with quantity of each.
Senders will not work on metal tanks.
Limited 1 year manufacturer warranty
See our SeeLevel Tank Monitor Comparison Guide to help you choose the right system for your RV.

Garnet 709-4 SeeLevel II Tank Monitoring System

Additional Product Information
Display Mounting Panel: Black flush mount panel, approximately 4” wide by 2.8” high by 1” deep (102mm wide X 71mm high X 25mm deep). Panel screws to wall. Required cutout size is 3” wide by 1.8” high.

System Power Requirements: Display requires 12 volts from the RV battery, the system will function from 11 volts to 16 volts. Current drain is less than 200mA.

Wiring: A single two wire conductor required from the display to the senders. All the senders are wired in parallel. 12 V power and ground required for display. Single wire required for LPG sender if sender grounded at tank.