When hooking up a towed vehicle, there are obviously several steps involved to make sure the vehicle is safely connected. One such aspect is adding a supplemental taillight system for braking and turn signals. These light systems need to be properly installed so that the braking or turning lights come on at the appropriate times. Most light systems need to be wired electrically, which can be a hassle if you are short on time or if you are not confident in your wiring abilities. Likewise, this can become an expense if you need to switch vehicles. The TowMate Wireless Tow Lighting System
takes away much of the effort by providing an easier way to get you going.
This TowMate Lighting System uses a wireless device to transmit signals to the towed vehicle. The easy installation streamlines the process, as the 32" light strip is held in place using magnets. This also makes things less complicated in the event that you need to switch vehicles. The wireless transmitter can send a signal up to 1000 feet, so there's no need to worry about it somehow being out of range. The light strip uses LEDs and plugs into the cigarette lighter or other power source, so the lights can be used for extended periods. While driving, the turning or brake lights will then be activated whenever they are needed. It features a lifetime warranty on the LEDs and electronics, and is made here in the USA, so you can be confident in this lighting system's performance.
Wireless RV Tow Lighting System by TowMate