OEM replacement 10" × 10" foot pad, leg switch plate, and mounting bolt for EQ Systems SL 14 and SL 16 jack legs with plunger leg switches. Specifically designed for leg switch variants — not interchangeable with the standard 7849 foot pad.
The EQ Systems 7819 is the OEM replacement foot pad, leg switch plate, and mounting bolt for SL series jack legs that include plunger style leg switches. It is compatible with the #7066 SL 14 jack leg (with leg switch) and the #7114 SL 16 jack leg (with leg switch).
The 7819 features an integrated plate cutout to accommodate the plunger style leg switch located at the bottom of the jack cylinder — this design clearance is what distinguishes it from the standard 7849 foot pad, which is used on non-leg-switch jack legs of the same 10" × 10" size. Using the wrong foot pad on a leg switch jack can obstruct the switch plunger, prevent proper switch activation, and cause incorrect jack position readings on the control panel.
The 7819 is designed exclusively for jack legs with plunger style leg switches. It is not interchangeable with the #7849 foot pad, which is for the same 10" × 10" size but used on non-leg-switch jack legs. Using the 7849 on a leg switch jack can block or interfere with the plunger switch, causing false jack position readings or Auto-Level faults. Always confirm whether your jack leg has a leg switch before ordering a replacement foot pad.
The 7819 kit includes the 10" × 10" foot pad, leg switch plate, and mounting bolt required for complete installation. The foot pad threads onto the rod end of the jack leg cylinder and is designed to pivot slightly when properly installed — this allows the pad to self-level on uneven terrain. When installed correctly, the foot should not be fully tight; it will move freely to pivot as needed.
7066 — SL 14 Jack Leg with Leg Switch Compatible SL 14 jack leg assembly (with plunger leg switch). 7114 — SL 16 Jack Leg with Leg Switch Compatible SL 16 jack leg assembly (with plunger leg switch), 12,000 lb capacity. 7849 — 10" × 10" Foot Pad with Bolt (no leg switch plate) Standard 10" × 10" foot pad for non-leg-switch SL series jacks. Not for use on leg switch jack legs.
To confirm the correct foot pad for your jack leg, refer to the EQ Systems Motorhome Jack Identification Chart available through EQ Systems Parts Identification Documents. Technical Support: EQ Systems Toll Free: 1-800-846-9659 Local: 574-264-3437 Hours: Monday–Friday, 7AM–4PM EST Manufacturer: EQ Systems — 19300 Grange St, Cassopolis, MI 49031