Single leg hydraulic bumper pull tongue jack with 6,000 lb lift capacity and 16" stroke. Commercial pump with manual override. Complete, ready-to-install system.
The EQ Systems 8065M TJ Series Hydraulic Tongue Jack is the smart upgrade over traditional manual crank jacks for bumper pull and towable trailer applications. Engineered by Equalizer Systems — a trusted name in hydraulic lifting and leveling — the TJ Series replaces the effort of hand-cranking with smooth, push-button hydraulic power rated at 6,000 lbs of lift capacity.
Using the same standard 3-bolt triangle hole pattern found on manual and electric jacks, the TJ installs in under 30 minutes with no special tooling required. The commercial-grade single function pump is equipped with a manual override screw drive, ensuring you're never stranded if power is unavailable. A patent pending clutch design safeguards the jack from damage caused by over-capacity loads or over-retraction, while the built-in key lockout deters theft and unauthorized use.
Powerful hydraulic system handles heavy bumper pull and towable trailers with ease
Drop-in 3-bolt triangle pattern matches manual and electric jack mounting — installs in under 30 minutes
Integrated key lockout protects against theft and prevents unauthorized jack operation
Patent pending clutch design guards against damage from over-capacity loads or over-retraction
The 8065M TJ Series is electrically powered and requires a 12V DC power connection from the trailer or tow vehicle battery. The included cable set connects directly to the battery for power. Included in the kit: Motor, clutch, operating switch, battery power cables, and installation instructions. No additional pump or control box is required — the unit is complete and ready to install right out of the box. The manual override screw drive is available at any time as a backup, independent of battery power.
The TJ Series is designed for straightforward installation: 1. Remove Existing Jack: Unbolt the existing manual or electric tongue jack from the trailer A-frame 2. Position the TJ Unit: Align the 8065M using the standard 3-bolt triangle hole pattern — no drilling or modification required in most cases 3. Secure the Jack: Bolt the unit securely to the trailer A-frame using the existing mounting holes 4. Connect Power: Route the included battery cables to the trailer or tow vehicle 12V battery following the included wiring instructions 5. Mount the Rocker Switch: Install the control switch in a convenient, accessible location 6. Test Operation: Verify full extension and retraction on both hydraulic and manual override modes before use Most installations are completed in under 30 minutes with standard hand tools.
Complete Kit — Ready to Install: • (1) Hydraulic Motor • (1) Clutch Assembly • (1) Rocker Style Operating Switch • Battery Power Cables • Installation & Operation Instructions No additional components required. The 8065M ships as a complete, ready-to-install system.
The TJ Series is engineered for a wide range of bumper pull and towable trailers: • Horse & livestock trailers • Cargo & enclosed trailers • Motorsports & race car haulers • Utility trailers with heavy tongue weight • Any bumper pull trailer with standard 3-bolt tongue jack mounting Replaces manual square leg jacks and compatible electric tongue jacks using the standard 3-bolt triangle hole pattern.
Technical Support: EQ Systems Toll Free: 1-800-846-9659 Local: 574-264-3437 Hours: Monday–Friday, 7AM–4PM EST Warranty: 2-Year Limited Manufacturer's Warranty covering defects in materials and workmanship under normal use. Manufacturer: EQ Systems — 19300 Grange St, Cassopolis, MI 49031