The Fasco 8710-4358 is a 4-3/4" diameter blower wheel. 5/16" bore size. 3600 RPM. Designed to replace the blower wheel in certain Fasco draft inducers.

The Goodman 0131P00025 is a replacement condenser fan motor that will fit most Goodman/Amana units. 208-230 volts, 1350/1170 RPM.

The Dayton 1TDN4 is a replacement blower motor. Replaces Dayton model 4C761. 49 cubic ft per minute, 3080 RPM. 115 volts.

The Dayton 1TDP2 is a replacement blower motor. Replaces Dayton model 4C763. 104 cubic ft per minute, 2815 RPM. 115 volts.

The Dayton Replacement Blower Motor is designed to replace JA1C182, 7021-3506, Dayton 2C914, or AO Smith/Century 9443. 49 cubic ft per minute, 2700/3080 RPM. 230 volts.

The Buck PESBR084 is a replacement blower motor designed for certain Buck wood and gas stoves.

The St. Croix Replacement Exhaust Blower Motor is compatible with most St. Croix pellet stove models.

The Dayton 1TDP3 is a replacement blower motor. Replaces Dayton model 4C443. 75 cubic ft per minute, 3020 RPM. 115 volts.

The Fasco OEM Replacement Exhaust Vent Blower is designed for certain Intercity furnace models. 3000 RPM, 115 volts.

The Dayton 1TDR6 is a replacement blower motor. Replaces Dayton model 4C006. 150 cubic ft per minute, 2450/2480 RPM. 115 volts.

The St. Croix Replacement Convection Blower Motor  designed to fit certain St. Croix pellet stove models.

The Breckwell A-E-033 is a replacement variable speed blower motor designed for pellet stoves. This blower motor relies on high-quality electronic components to run at variable speeds. Damper vibrations are reduced by high-temperature rubber bushings and washers.

The Dayton 1TDP6 is a replacement blower motor. Replaces Dayton models 2C915 and 1TDP6A. 133 cubic ft per minute, 2670/2880 RPM, 230 volts.

The Dayton 1TDP8 is a replacement blower motor. Replaces Dayton model 4C015. 184 cubic ft per minute, 2750/3150 RPM, 115 volts.

The Kozi FAN12003 is a replacement exhaust blower motor designed for certain Kozi pellet stove models.

The Dayton 1TDP4 is a replacement blower motor. Replaces Dayton model 2C067. 71 cubic ft per minute, 1580 RPM. 115 volts.

The Dayton 1TDU9 is a replacement blower motor. Replaces Dayton model 4C940. 76 cubic ft per minute, 2680/3020 RPM. 115 volts.

The Dayton 1TDU7 is a replacement blower motor. Replaces Dayton model 4C825. 127 cubic ft per minute, 3235 RPM. 115 volts.

The Fasco Replacement Exhaust Vent Blower is designed for certain Intercity furnace models. 3000 RPM, 115 volts.

The Fasco Replacement Draft Inducer Blower Motor is designed for various Fasco and Trane furnace models. 3000 RPM, 208-230 volts.

The Dayton 1TDT6 is a replacement 2-speed blower motor. Replaces Dayton model 4C565. 428/293 cubic ft per minute, 1500/1085 RPM. 115 volts.

The Dayton 1TDR1 is a replacement blower motor. Replaces Dayton model 2C916. 168 cubic ft per minute, 1400/1650 RPM. 230 volts.

The Dayton 1TDR4 is a replacement blower motor. Replaces Dayton model 4C869. 271 cubic ft per minute, 1380/1620 RPM. 230 volts.

The Dayton Replacement Blower motor is designed to replace Fasco model 7021-6560. 115 cubic ft per minute, 2800/3200 RPM. 115 volts.

The Avalon 250-00527 is a replacement combustion exhaust fan blower motor for Lopi/Avalon pellet stoves. The combustion exhaust blower maintains the flame by forcing forced air through the stove.

The Fasco Draft Inducer Blower Motor Replacement is designed for certain Fasco and Trane furnace models. Automatic overload protection. Thermally protected. 115 volt motor. 3000 RPM.

The Fasco Replacement Draft Inducer Blower Motor is designed for certain Fasco and Lennox furnace models. 3000 RPM, 208-230 volts.

The Dayton 1TDU8 is a replacement blower motor. Replaces Dayton model 4C826. 223 cubic ft per minute, 2600/2750 RPM. 115 volts.

The Dayton Replacement Blower Motor is designed to replace Fasco model 7063-7161. 227 cubic ft per minute, 1430/1700 RPM. 115 volts.

The Fasco Replacement Furnace Draft Inducer Blower Motor is designed for various Fasco and ICP furnace models. 3060 RPM, 230 volts.

The Dayton 1TDR9 is a replacement blower motor. Replaces Dayton models 4C264 or 4C448. 463 cubic ft per minute, 1520 RPM. 115 volts.

The Fasco Replacement Draft Inducer Blower Motor is designed for various Rheem and York furnace models. 2420/2500 RPM, 115 volts.

The Fasco Replacement Draft Inducer Blower Motor is designed for certain Fasco and Lennox furnace models. 2850/3300 RPM, 115 volts.

The Dayton 1TDP3 is a replacement blower motor. Replaces Fasco models 7090-2379 and 7064-1678. 310 cubic ft per minute, 1400/1640 RPM. 115 volts.

The Dayton 1TDT7 is a replacement 2-speed blower motor. Replaces Dayton model 4C565. 542/409 cubic ft per minute, 1380/1045 RPM. 115 volts.

The Dayton 1TDR8 is a replacement blower motor. Replaces Dayton model 2C917. 358 cubic ft per minute, 1350/1530 RPM. 230 volts.

The Dayton 1TDR5 is a replacement blower motor. Replaces Dayton model 2C069. 312 cubic ft per minute, 1280/1380 RPM. 115 volts.

The Dayton 1TDT2 is a replacement blower motor. Replaces Dayton models 4C445, 2C906, 2C962, 4C667, 4YJ32. 549 cubic ft per minute, 1330 RPM. 115 volts.

The Fasco A163 is a replacement 120V draft inducer blower motor that will directly replace certain Fasco, Emerson, and Lennox draft inducers. 3.3" diameter. 3400 RPM.

The QuadraFire Replacement Combustion Exhaust Blower Motor is designed to fit an original QuadraFire Mt. Vernon pellet stove.

The Fasco Replacement Draft Inducer Blower Motor is designed for certain Fasco, Emerson, Amana or Goodman furnace models. 3000 RPM, 115 volts.

The Dayton 1TDT3 is a replacement blower motor. Replaces Dayton model 4C870. 559 cubic ft per minute, 1420 RPM. 230 volts.

The US Motors Permanent Split Capacitor Condenser Fan Motor is designed for various commercial and residential HVAC units. 208-230 volts, 1075 RPM, 1/6-1/3 horsepower.

The US Motors Permanent Split Capacitor Direct Drive Fan and Blower Motor is designed for use in a variety of commercial and residential HVAC systems.

The US Motors Permanent Split Capacitor Condenser Fan Motor is designed for various commercial and residential HVAC units. 208-230 volts, 825 RPM, 1/6-1/3 horsepower.

The Harman 3-21-33647 is a replacement convection blower motor designed for certain Harman pellet stove models.

The Fasco Replacement Draft Inducer Blower Motor is designed for certain Fasco and Lennox furnace models. 3400 RPM, 230 volts.

The Packard 66649 is a replacement draft inducer blower motor for certain Carrier models. 208-230 volts. 3450 RPM.

The Fasco Replacement Draft Inducer Blower Motor is designed for various Fasco and ICP furnace models. 3450 RPM, 115 volts.

The Dayton 1TDT8A is a replacement 2-speed blower motor. Replaces Dayton model 5C508. 797/549 cubic ft per minute, 1360/970 RPM. 115 volts.

The Dayton 1TDT9 is a replacement blower motor. Replaces Dayton model 4C668. 794 cubic ft per minute, 1030 RPM. 115/230 volts.

The Dayton 1TDT4 is a replacement blower motor. Replaces Dayton model 2C946. 805 cubic ft per minute, 910/1030 RPM. 115 volts.

The Packard 66755 is a draft inducer blower motor designed to replace Carrier part number 309868755. 115 volt motor, 0.86 amps, 3300 RPM.

The Packard 66756 is a replacement draft inducer blower motor for certain Carrier models. 115 volts. 3300 RPM. 1.75" diameter inlet.

The Fasco General Purpose Fan and Blower Motor is a 3.3" diameter, 1/8 HP, 115 volts, 3000 RPM. Thermally protected, totally enclosed motor.

The Fasco Replacement Draft Inducer Blower Motor is designed for certain Fasco and Lennox furnace models. 3.3" diameter motor, 3200 RPM, 208-230 volts.

The Dayton 1TDU1 is a replacement blower motor. Replaces Dayton model 4C830. 990 cubic ft per minute, 920/1050 RPM. 115/230 volts.

The Packard 66758 is a replacement draft inducer blower motor for certain Carrier models. 115 volts. 3400 RPM.

The Fasco Replacement Double-Shafted Fan Motor is designed as a single phase, 115 volt motor, 1,100 RPM. Greenheck motor number 304970.

The Carrier 326628-763 is a 2-speed inducer fan furnace blower motor designed for Carrier manufactured furnace models, including Bryant and Payne.

The Fasco A331 is a replacement draft inducer blower motor for certain Fasco and Lennox furnace models. 3.3" diameter motor, 3200 RPM, 460 volts.

The Packard 66757 is a replacement draft inducer blower motor for certain Carrier models. 115 volts. 3000 RPM. 3" diameter inlet.

The Packard 82113 is a 3-speed blower motor designed to replace Carrier HC45TE113 or GE 5KCP39PGV623CS. 3/4 HP blower motor, 115 volts, 1075 RPM.

The Dayton 1TDU2 is a replacement blower motor. Replaces Dayton model 4C831. 1202 cubic ft per minute, 1320/1380 RPM. 115/230 volts.

The Dayton 1XJX7 is a replacement blower motor. 1009 cubic ft per minute, 1070 RPM. 115 volts. Motor, housing and blower wheel are included. 9-7/16" wheel diameter. 1/6 horsepower.

The Fasco Replacement Furnace Draft Inducer Blower Motor is designed for certain Fasco and Trane models. 3.3" diameter motor, 3417 RPM, 208-230 volts.