1. Remove the four screws from the existing garnish and remove the garnish
2.Drill a hole in the garnish and pass Chandelier Vent Light wires through the hole
3.Tap power at the vent from existing wires or fish wires from nearby ceiling light. (additional wire may be needed)
4. Power the Chandelier Vent Light: make sure the polarity is correct (black wire is positive & white wire is negative)
5.Install the Chandelier Vent Light by raising it to the ceiling and fastening it with the four screws
6. Done! Sit back, relax and enjoy the RV Chandelier / Trailer Vent Light
7. Exercise caution when installing.