Home > Electronics > Seelevel Tank Monitoring System >

Garnet 709-4 SeeLevel (4) RV Tank Monitoring System
Garnet 709-4 SeeLevel II Tank Monitoring System
Garnet SeeLevel II Tank Monitoring System
 
Alternative Views:
Price: $290.95
MFG P/N: 709-4_System
MFG: Garnet Instruments
SHIPS: Same Business Day Before 1 PM EST

Quantity in Stock :27


Availability: In Stock
Qty:

Instructions
 
The SeeLevel 709-4 Tank Monitoring System is designed to accurately display fluid levels in a motorhome or camper with four holding tanks. This system monitors battery voltage, fresh, grey, galley and black water levels. The level in percent is shown on a three digit LED display.
  • Monitors battery voltage, fresh water tank, grey water tank, black water tank and galley tank
  • Provides accurate tank level information using percentage of full readout
  • Tanks are monitored using Garnet’s proprietary external level sensing technology
    • This ends fouling problems caused by debris build-up in the holding tank
    • Detailed diagnostic information monitors sender operation
  • Tank senders connect to the display via a common bus network
    • All senders can be connected using the same wire
  • Measures tanks from 3.5" to 34" depending on the sensors you specify.
    • 710-AR Sender (standard) 3.5" min to 10.5" max (stacked = 21")
    • 710-ES2 Sender (optional) 5.5" min to 14" max (stacked = 25")
    • 710-SS Sender (optional) 7" min to 14" max (stacked = 34")
  • Uses common industry connector for ease of installation and servicing
  • Display requires 12 volts from the RV battery, the system will function from 11 volts to 16 volts
  • Current drain is less than 200mA
  • Panel Dimensions: 4" W x 2.8" H x 1" D
    • Required Cutout Size: 3" W x 1.8" H
  • Includes:
    • (1) Display monitor.
    • (1) pigtail
    • (4) mounting screws.
    • (4) 9″ 710-AR standard tank senders
  • NOTE: If you have taller tank(s) and require a 12" Sender = 710-ES or 16" Sender 710-SS specify in the checkout order notes along with quantity of each.
  • Senders will not work on metal tanks.
  • Limited 1 year manufacturer warranty
  • See our SeeLevel Tank Monitor Comparison Guide to help you choose the right system for your RV.

Garnet 709-4 SeeLevel II Tank Monitoring System
Additional Product Information
Display Mounting Panel: Black flush mount panel, approximately 4” wide by 2.8” high by 1” deep (102mm wide X 71mm high X 25mm deep). Panel screws to wall. Required cutout size is 3” wide by 1.8” high.

System Power Requirements: Display requires 12 volts from the RV battery, the system will function from 11 volts to 16 volts. Current drain is less than 200mA.

Wiring: A single two wire conductor required from the display to the senders. All the senders are wired in parallel. 12 V power and ground required for display. Single wire required for LPG sender if sender grounded at tank.

ACCESSORIES
Garnet 709-filler SeeLevel 709 Filler Plate Garnet 709-gasket SeeLevel 709 Gasket Garnet 709-4 SeeLevel II 4 Monitor - Monitor Only Garnet 710-SS SeeLevel Sender Board - 16"
Price: $10.25
Price: $10.25
Price: $84.95
Price: $59.95
Garnet 709-filler SeeLevel 709 Filler Plate Garnet 709-gasket SeeLevel 709 Gasket Garnet 709-4 SeeLevel II Monitor - Monitor Only Garnet 710SS SeeLevel II Sensor Board - 16"