• Safe start and full time flame sensing.
• Pre-purge and interpurge timings, 30 seconds each.
• Multiple trials for ignition.
• Ignition Time: 15 seconds.
• 3 ground terminals for easy wiring.
• Remote or local flame sense options.
• 5 minute or 1 hour automatic reset after lockout.
• Ideal for various applications including commercial cooking equipment, commercial gas furnaces, unit heaters, and water heaters.
• Input Power Control: 18-30 VAC 50/60 Hz (Class 2 Transformer)
• Input Current Drain: 300 mA @ 24 VAC with gas relay energized (Control only)
• Main Gas Valve: 2.0A max (continuous)
• Operating Temperature: -40 to +176 deg. F (-40 to +80 deg. C)
• Sforage Temperature: -40 deg. F to +185 deg. F (-40 deg. C to +85 deg. C)
• Flame Sensitivity: 0.3 uA minimum
• Flame Failure Response or Re-ignition Time: 0.8 seconds maximum
• Flame Detecfor Self-check Rate: Once per second minimum
• Types of Gas: Natural, LP, or manufactured
• Spark Rate: Remote sense (50/60 Hz) Local sense (25/30 Hz)
• Dimesions: 4.92" length x 3.32" width x 2.71" height
• Weight: 0.8 lbs.
• Moisture Resistance: Conformal coated to operate to 95% R.H. (non-condensing)
• Tries for Ignition: One or three try versions available
• Trial for Ignition Periods: 4, 6, 8, 10, 15 seconds available
• Pre-purge Timings: None, 15, or 30 seconds available
• Interpurge Timings: None, 15, or 30 seconds available
• Also known as NBK Parts 20460.

Fenwal Direct Spark Ignition Control Module, 24 VAC