- (4) refills kit.
- Refills for OTG2-DDI Deionizer.
- High grade duel bed resin.
- Purifies water through ion exchange technology.
- Produces approximately 460 gallons of water per refill with the Deionizer.
- Can produce up to 1150 gallons per refill depending on Total Dissolved Solids.
- Gives a spot free rinse every time.
- Shelf life: 18 - 24 months.
- Note: is not interchangeable with CR Spotless.
- Includes resin, funnel, lubricant, distributor cap and instructions.
Duel Bed Standard Deionizer Refills - Four by On The GoThis On The Go Duel Bed Standard Deionizer Refills - Four is the kit you need, for a refill on the cation and anion resin for your On The Go OTG2-DDI Portable Water Deionizer. It includes everything you need to refill your tank (4) times and the installation is quick and easy. This will give you approximately 460 gallons of purified water, the ability to rinse 15 - 38 RVs per refill, before having to replace the resin. This resin for the deionizer will give your vehicle a spot free rinse every time.
Gets Rid Of Dissolved Minerals For A Spot Free RinseIn order to have a spot free rinse on your RV or any vehicle, you must get rid of the dissolved minerals. In the deionizer the water flows through the first resin material removing calcium, iron and magnesium ions similar to a normal water softening process. However, unlike home softening equipment, deionization units have a second type of resin that also removes negatively charged ions, such as Fluorides, in the process. In the duel tank model it has 2 tanks, each tank holding a different resin, one for cation and the other for anion. The result is mineral-free purified water that leaves no water spotting after rinsing a clean RV.
Deionization ProcessThe process of deionization is when almost all mineral ions are removed from the water, such as cations and anions. Some of the cations that get removed are sodium, calcium, iron and copper and the anions are chloride and sulfate. It has a chemical process in which hydrogen ions and hydroxide ions are exchanged for dissolved minerals. This creates a high purity water very similar to distilled water.
Technical Specs.Application: demineralization units.
Appearance: spherical beads.
Component: duel bed design.
Moisture retention: 48% - 54%.
Mean size typical: 0.60 - 0.85 mm.
Temp. limit: 212 F.
Spec. gravity: 1.07 g/ml.