OEM replacement 12" × 12" foot pad and mounting bolt for the EQ Systems DP 18 jack leg (part #7134, no leg switch). 16 lbs. Larger pad size specified for the DP 18's 17,500 lb per-leg capacity.
The EQ Systems 7821 is the OEM replacement foot pad and mounting bolt for the DP 18 jack leg (part #7134, no leg switch). The foot pad is the ground contact surface at the base of each hydraulic jack leg — it distributes the coach's weight across a larger surface area to prevent the jack from sinking into soft ground and to provide a stable, level base during leveling.
The 7821 uses a larger 12" × 12" pad size to match the DP 18's higher 17,500 lb per-leg load capacity. The pad is designed to pivot slightly on the rod end to self-adjust to uneven or sloped terrain, and is secured with the included mounting bolt. The kit includes both the foot pad and the required bolt for complete installation.
The 7821 is specified for the #7134 DP 18 jack leg (no leg switch) only. EQ Systems jack legs use different foot pad sizes depending on the jack model and capacity — using the wrong pad size can result in improper fitment or reduced ground stability. Refer to the Jack Replacement – Cylinder & Foot Identification Chart in EQ Systems Parts Identification Documents to confirm the correct foot pad for your jack, or contact EQ Systems support.
The 7821 kit includes the 12" × 12" foot pad and the mounting bolt required for installation. The foot pad threads onto the rod end of the jack leg cylinder and is designed to pivot slightly when properly installed — this is normal and intentional, allowing the pad to self-level on uneven terrain. When installed correctly, the foot should not be fully tight; it will move freely to pivot as needed.
7134 — DP 18 Jack Leg without Leg Switch The jack leg this foot pad is designed for. 17,500 lb lifting capacity, powder-coated straight leg design. 7234 — DP 18 Jack Leg with Leg Switch Same DP 18 jack leg with a plunger style leg switch included. 7849 — 10" × 10" Foot Pad with Bolt Smaller foot pad for lower-capacity SL series jacks including the SL 16. Not for DP 18 applications.
To confirm the correct foot pad for your jack, refer to the Jack Replacement – Cylinder & Foot Identification Chart available through EQ Systems Parts Identification Documents. Technical Support: EQ Systems Toll Free: 1-800-846-9659 Local: 574-264-3437 Hours: Monday–Friday, 7AM–4PM EST Manufacturer: EQ Systems — 19300 Grange St, Cassopolis, MI 49031