Use a cordless drill to operate BAL stabilizing jacks with slotted-head drive screws. 6" shaft, fits 3/8" chuck drills. For BAL jacks 23025 and 23026.
The BAL 21100003 is a slotted drill adapter for operating BAL stabilizing jacks that use a slotted-head drive screw — the flat-blade slot style rather than a 3/4" socket. The flat bit end of the adapter engages the slotted drive screw on the jack, and the hex shank on the other end fits into a standard 3/8" drill chuck. The 6" shaft provides enough reach to engage jacks under the RV without having to position the drill awkwardly close to the ground.
• 1x BAL 21100003 slotted drill adapter
21100003 (this item): Slotted flat-blade tip — for BAL jacks with slotted-head drive screws (23025, 23026). 6" shaft. 3/8" chuck. 21100004: 3/4" socket drive — for BAL scissor jacks, C-jacks, and Lo Pro jacks with 3/4" hex socket drives (24002C, C-jack series). 8" shaft. 3/8" or 1/2" chuck. Match the adapter to your jack's drive type — slotted screw vs. 3/4" hex socket.
Per BAL's own warnings: do not use a cordless impact driver. Use a cordless drill with an adjustable clutch/torque setting so you can feel resistance during operation. Over-torquing will damage the jack's drive screw.